Safe operation of CNC roll grinder
I. Inspection before operation
Before starting the CNC roll grinder, you must carry out the following checks:
Check the bearings and transmission system for damage or signs of wear.
Check whether the coolant is sufficient
Check that the machine is working properly and that all parts are securely fastened
Check whether the delamination machine is operating correctly and whether the pads are flush
Check whether the pipes and valves on the machine base are correct
II. Preparation for operation
Before starting the CNC roll grinding machine, the following preparations must be made:
Wear appropriate personal protective equipment such as eye protection, gloves and earplugs
Safety against rolls and work tools
Control traffic around the wellhead and machine
Provide safe passage for flammable and explosive materials
Remove jewelry such as watches, rings, necklaces, etc. to avoid getting stuck.
III. Precautions during operation
When running roll grinder, you must pay attention to the following matters:
The operator must stand in a safe position to avoid injury or damage to the machine.
Operators should control operations through handles and controls rather than using physical force.
When you need to enter the inside of the machine, you must first turn off the power.
During operation, the status of the machine must be constantly monitored to ensure it is functioning properly.