What to pay attention to the use of welded pipe unit
When using the welded pipe unit, you need to pay attention to the following matters.
1. Purchase qualified products. Welded pipe unit belongs to special equipment, the use of which must be purchased with a certificate of conformity to ensure quality and safety.
2. Correctly grounded. Welded pipe unit belongs to the charged equipment, must be correctly grounded to ensure work stability and personal safety. The grounding wire should be connected to the special grounding terminal on the chassis.
3. Input voltage is correct. The input voltage of the welded pipe unit must be consistent with its rated voltage, too high or too low will affect its normal operation and service life.
4. Pipe ventilation. Operation of the pipeline will produce more welding fumes and gases, must ensure that the pipeline ventilation, otherwise it is easy to be poisoned.
5. Selection of suitable welding wire. The material and diameter of the welding wire must be matched with the technical parameters of the pipe welding unit, otherwise it will affect the welding quality and service life.
6. Inspection. Regularly check the connection and damage of each part of the welded pipe unit, if any problem is found, deal with it in time, so as not to affect the use.
7. Operating procedures. Operators must operate in strict accordance with the operating procedures, including power-up sequence, setup, shutdown sequence, etc., to ensure normal and safe use.
8. Waterproof and moisture-proof. Welded pipe unit is not waterproof, can not be used in a humid environment, should prevent water or other liquids into the chassis to avoid short circuit.
9. Anti-overload use. Welded pipe unit has a continuous set of load parameters, the work of the current and frequency should be strictly controlled within the rated range to prevent overloading.
10. Maintenance. After a certain period of time, the welded pipe unit should be maintained according to the requirements of maintenance, inspection and cleaning of the internal chassis to ensure its normal operation.
11. Operator. Operators of the welded pipe unit must be professionally trained, proficient in its structure, principles and operating procedures to ensure the correct and safe use.